The Near smart downlight is easy to install. We recommend that you hire a licensed professional electrician to complete the installation for you for safety reasons.
For brave-hearts and adventurers
Step 1: Simply turn off the MCB and lighting switch connected to the lighting point.
Step 2: Ensure that the cut-hole size is 154mm and height clearance is at least 70mm.
Step 3 (Optional): Use a non-contact voltage tester and tap it on the incoming live and neutral wire to make sure that the electricity is cut off.
Step 4: Replace your old downlight with the Near smart downlight. As both live and neutral wires from the Near smart downlight are interchangeable, do not worry about connecting to the wrong incoming live/neutral wires.
Step 4: Insert the Near smart downlight and you're set.